How To Repair iPhone X Rear Camera Socket Drop Off Points

The customer sent us an iPhone X. Isassemble the rear back camera connector socket, the points drop off from base. How to fix it?

Using the iPhone Opening toolkit to remove the phone, we found that the pad was removed before it melted.

Observe the board carefully under stereo zoom microscope, we notice the board is a little deformed. Seeing the pad, it's a very tricky problem, but we still need to solve the fault.

First, it is urgent for us to process the J3900 rear camera soldering pad, flatten and plaint tin again, next, soldering a jump wire.




After finished welding jump wire, we need to wrap it around one by one, and apply the UV flux oil ,one important is that we also need to measure the resistance value by digital multimeter, luckily, it is normal, now we can weld the soldering pad.



Then solder the ball on the jump wire, welding the base. Welding tin to the untouched pin and soldered well. Next, assemble the iPhone X and test, to my surprise, the function of rear camera have recovered normal. The procession of fixing iPhone X rear camera connector socket.
come to end.


For more professional skills and equipment, please visit www.vipprogrammer.com.

评论

此博客中的热门博文

How to install 2015.R3 Delphi DS150E Software

New product introduction: JC V1 programmer repair iPhone light sensor and vibrator

How to repair iPhone 8 stuck on Apple logo