Short Way To Fix iPhone 6 Screen Not Work

When you come across this situation that your iPhone suddenly stop working, and it can' t be turned on. It turns black and blank. If your iPhone screen issue is not the hardware issue, maybe you can follow workarounds are only applicable if the black or blank display issue on the iPhone 6s is caused by a software glitch or corrupt application. Here are a few options you can resort to when all of a sudden your iPhone 6s screen goes black or blank.

Method 1: Restart or reboot your iPhone.

The software problems are very easy to fix. There are often remedied by a simple reboot on the device. If you want to restart your iPhone 6s, follow these steps:

• Press down the Sleep/Wake button until the red slider shows up.
• Slide your finger across the slider to turn the iPhone off.
• After a few seconds, hold down the Sleep/Wake button again until the Apple logo shows up on screen.

If the restart is successful, then you can try force quitting the app you think is causing conflict. To force close an app or force an app to quit, follow these steps:

• Go to the Home screen.
• From the Home screen, quickly tap the Home button twice.
• Swipe upwards on the screen.
• If a restart is not possible, then you can hard reset your iPhone instead. Please refer to the second method to continue with a hard reset.

Method 2: Force Restart

Serious software problems often require a hard reset or force restart. Forcing your iPhone to restart won’t affect or erase the contents on your device. To hard reset of force restart your iPhone 6s with black/blank screen, or not responding, just hold down the Sleep/Wake button and the Home button simultaneously for at least 10 seconds until the Apple logo appears.

Method 3: Restore your iPhone through iTunes

If the hard reset can' t solve your problem, your next option is to restore your iPhone through iTunes via Recovery Mode.

In this situation, you would need to connect your iPhone to a computer with the latest version of iTunes installed. Here’s how it’s done:

Step 1: Connect your iPhone to the computer (PC or Mac) using the supplied USB cable/connector.

You may need to enter the passcode or prompted to Trust this Computer. Just follow the onscreen instructions to complete the process. In case you’re not sure of or forget the passcode, use recovery mode to erase your device instead. Refer to step 2.

Step 2: While your iPhone is connected, press and hold the Sleep/Wake and Home buttons simultaneously.

Do not release both keys when the Apple logo appears. Keep holding both keys until the Recovery Mode screen shows up.

Step 3: If prompted with the option to restore or update, select Update.
Wait for iTunes to attempt to reinstall iOS without erasing your data. It could take more than 15 minutes for iTunes to download the software for your iPhone. Once it' s done, your device will exit recovery mode.

If you don' t fix your iPhone by these ways, maybe you need send it for repair shop. While Apple’ s high-quality repair services are expensive, I won’t recommend doing the repair yourself as, if it is the hardware.

More information about phone repair tools and guides, you can choose Vip Fix Shop Team.