Why Does My iPhone 6 has Error 9 and Error 56

Many users have complained about the iTunes error 56 when they try to restore iPhone with iTunes or update iOS version on iPhone. What happens when error 56 occurs? This error 56 basically prevents you from updating your iPhone and restoring it via iTunes. Even though iTunes is the most trusted and reliable software, specially designed by Apple to manage iOS devices. Since this off-beat error is becoming increasingly prevalent, Vip Fix Shop Team decided to bring out an article on how to repair the phones to tackle it. Now let us repair the solutions to fix iPhone error 56.

After dropping,if the cell phone reports error 9 and 56 when flashing, this kind of symptom is basically caused by CPU to logical chip and NFC chip disconnection. Because the main CPU chip on the motherboard and PCB base get a loose connection, which results in boot failure or flashing failure so that error code appears. The customer description is shown in picture 1-1.

Flashing the device while reporting error 9, find out there is a test point with false soldering from chip to CPU, directly remove the tin above the CPU and solder at the logic chip position. As shown in picture 1-2.

Scraping the CPU off slowly and find the signal point to solder jumper wire. As shown in picture 1-3.

Soldering jumper on the position where the chip are connected, and the iPhone can be directly switched into the system after the connection is made up. After the customer go back for a few days, the device reported error 56 again, error 56 is caused by the broken wire from NFC to CPU or damaged NFC chip, firstly we remove the NFC chip. As shown in picture 1-4.

NFC chip is diconnected and most of solder points are dropped, it's all blank for the places without wire end, so soldering the useful two points with solder iron. As shown in picture 1-5.

Fill in the chip, then flash the iPhone 6 device, it finally can work perfectly.