How to repair damaged iphone LCD Screen

Lately my friend ask me how to change the iphone broken screen, and I know it is a problem for someone. So today I will give you some guide to DIY your iphone broken screen.

Because the iPhone screen is integrated with the digitizer and is replaced with the entire front assembly. I will recomment some necessary iphone repair tools to help you work. If you need you can find those at Vipprogrammer.com.

Thin metal blades

Plastic spudger

Opening tool

Tweezers

Pentalobe screwdriver. which you'll use to remove the phone's tamper-resistant outer-case screws.

When you got some phone screen repair tools from vipprogrammer.com, it is very easy to repair your iPhone screen, let's follow me to begin your fix working.

1.Back up your data

The first step is to back up all the iPhone's data using iCloud or iTunes, just in case wrong. You'll also need to eject the SIM card using the eject tool or a paper clip.

2.Remove the back cover

You can open the iPhone by removing the two screws located on the bottom edge.As noted above, you'll need a special pentalobe screwdriver for this task. Then, slide the back cover upward and lift it off.

3.Remove the internal hardware

Before installing the new display assembly, you'll need to remove most of the iPhone's internal hardware, starting with the battery.

4.Remove the broken display assembly

Finally, we can turn our attention to the broken display assembly. It's held to the metal frame with 10 screws: 3 each along the two sides and 1 in each corner. You'll need to remove them all, keeping track of the washers under the 6 side screws.

5.Install the new display assembly

6.Rebuilt the iPhone

To Rebuilt the phone, Please rework through the previous steps. Start with the vibration motor, then install the speaker assembly, motherboard, rear camera, motherboard shields, battery, and finally the back cover.

Finally check your iphone and rework it.